Show Spanning-Tree Detail; Show Spanning-Tree Interface - Siemens SIMATIC NET Configuration Manual

Network structures
6.3 Spanning Tree
Result
The settings for the spanning tree function of the bridge are displayed.
6.3.1.4

show spanning-tree detail

Description
This command shows the detailed settings of the spanning tree function.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show spanning-tree detail
Result
The detailed settings for the spanning tree function are displayed.
6.3.1.5

show spanning-tree interface

Description
This command shows the settings of the ports for the spanning tree function.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
244
or
cli#
or
cli#
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05