Setting The Anchor-Watch Alarm Honk; Table 11: Yeoman Plotter Setup With The Unit - NorthStar 951X Installation Manual

Gps chart navigators
Hide thumbs Also See for 951X:
Table of Contents

Advertisement

Connecting to other

Setting the anchor-watch alarm honk

951/952 INSTALLATION MANUAL Revision B
Downloaded from
www.Manualslib.com
Connecting with a Yeoman chart plotter
devices
To enable the 951/952 to communicate with a Yeoman electronic chart
plotter, refer to the table below.

Table 11: Yeoman plotter setup with the unit

Yeoman wires
NMEA OUT (white)
(DATA A+)
Data Return (green)
(GROUND)
NMEA IN (red)
(DATA +)
RETURN (black)
(GROUND)
Connecting with a radar device
The 951/952 can be set to interface with a radar device. The unit supports
the NMEA TLL sentence, sometimes referred to as the "rattle" sentence.
This sentence lets the unit communicate its position to an interfaced
radar device, which tracks a user-defined target. In turn, the interfaced
radar device communicates to the unit the target's position—in lat/lon
coordinates—so that you can see the target symbol, displayed as a way-
point, right on the CHART screen (after you save the position). The target
symbol is displayed with the name -RADAR on the CHART screen, as well
as on both the ALPHA and LOCAL waypoints lists (to access these lists,
press the :$<3765287(6 key, then :$<37 /,67 menu key, then the
1(;7 /,67 menu key until you reach the desired list). On the ALPHA and
LOCAL lists, this radar waypoint is displayed with the hours/minutes/sec-
onds/day/month/year (for example, 12:50:20-30JUN99) in the descrip-
tion field.
In the anchor-watch alarm function, you can set the 951/952 to honk, in
addition to beep, as long as you've connected a honker with pin #14 on
the interface connector. See Figure 23 below for the hardware modifica-
tion required to support the unit's honk feature. You can use Radio Shack
part number 273-060, or an equivalent.
manuals search engine
CONNECT TO EITHER
951/952 port 1
NMEA IN (brown #3)
white with blue stripe (#4)
NMEA OUT (violet#12)
blue with white stripe (#8)
SECTION THREE - Interfacing
951/952 port 2
white with brown stripe (#6)
white (#5)
yellow (#15)
black (#10)
Page 55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

951xd952x952xd

Table of Contents