NorthStar 951X Installation Manual page 59

951/952 INSTALLATION MANUAL Revision B
Downloaded from www.Manualslib.com
unit. To obtain software version 3.12, call the Northstar Sales Depart-
ment to order the Waypoint Database Sharing Upgrade Kit, part
number 1500-WDS, which includes step-by-step instructions for
installing the software.
2. Connect two units to allow for transferring of all waypoints and
routes (call the Northstar Sales Department to order the connector
kit, part number 1500-WDS).
3. Transfer all waypoints and routes between the desired units.
When transferring waypoints and routes between two units,
Northstar recommends that you follow the detailed instructions
in the Northstar 951/952 Operator's Manual, Rev. B (part num-
ber GM1500C). Failure to follow these instructions may result
in the loss of valuable waypoint and route data. It is highly rec-
ommended that you read these instructions before transferring
waypoints and routes.
Remember: Every unit you want to import waypoints and
routes to, or export waypoints and routes from, must have the
waypoint/route sharing software upgrade (version 3.12)
installed. You can't import waypoints/routes into a unit, or
export waypoints/routes from a unit, that doesn't have the
waypoint/route sharing feature, regardless of whether the
other unit has the feature.
Connecting the two units
Before you can transfer waypoints and routes between the two units, they
must be properly connected using the following parts from the Waypoint
Database Sharing Upgrade Kit:
•
2 boots
•
2 ferrite beads
•
2 solder-cup-style cable connectors with cable clamp
• 2 different size grommets (for different size cables)
You also must select a cable, which isn't included in the kit. Use only
Belden 9503 twisted pair cable.
Connecting the units involves three main procedures: assembling the
cable, terminating the cable, and connecting the cable ends; all are
described below.
To assemble the cable:
1. Cut the cable to the desired length.
2. Slide the following parts onto each end of the cable, in the following
order:
manuals search engine
SECTION THREE - Interfacing
NOTE:
NOTE:
Page 49