Samsung OfficeServ 7100 Technical Manual page 421

OfficeServ 7100
TECHNICAL MANUAL
ALIVE STS:
SIG TYPE:
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER Used to store data and advance to next MMC
ACTION
1. Press TRANSFER 833.
Display shows the first table number.
2. Dial the selected table number using the
KEYPAD (eg. 101)
OR
Press UP or DOWN key to select a table and
press RIGHT soft key to move cursor.
3. Press UP or DOWN key to select a table entry
OR
Press RIGHT soft key to move cursor.
4. Using the keypad input a 12 digit IP address
5. Press UP or DOWN key to select the next
table entry or table option
6. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC entry.
MMC: 833
value is 01800, meaning a check will be performed every 1.8
seconds. A setting of 00000 means that no periodic checks will
be performed. The maximum setting is 65535.
ENTRY1 AVAIL ~ ENTRY4 AVAIL:
These entries display the status of the devices at IP ADDR 1 ~
4. This status is based on a simple ping test and may not
necessarily imply full connectivity.
This option specifies the TCP/IP communications protocol to
use. The available selections are UDP (the default) and TCP.
Used to scroll through options
Used to enter selections
Move cursor left and right
Home Page
PROGRAMMING
PART 2 MAY 2009
DISPLAY
TB(000)IP ADDR 1
165.213. 97.185
TB(101)IP ADDR 1
165.213. 97.185
TB(000)IP ADDR 1
165.213. 97.185
TB(000)IP ADDR 1
165.213. 97.185
TB(000)IP ADDR 1
192.168. 1. 10
Table of Contents