Samsung OfficeServ 7100 Technical Manual page 18

OfficeServ 7100
TECHNICAL MANUAL
MMC: 100
DESCRIPTION:
Allows the system administrator or technician to lock or unlock an individual station
or all stations simultaneously. The three options are as follows:
0 UNLOCKED
1 LOCKED OUTGOING
2 LOCKED ALL CALLS
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION
1. Press TRANSFER 100
Display shows
2. Dial station number (e.g., 205)
OR
Press UP or DOWN to select station and use
RIGHT soft key to move cursor
OR
Press ANS/RLS to select all stations.
3. Enter 0 to unlock or 1 to lock (e.g. 1)
OR
Home Page
STATION LOCK
Unlocks a locked station.
The keyset cannot make calls outside the
system. It can however make and receive
intercom calls and receive incoming C.O.
calls. When in this mode the HOLD key of
an iDCS, DS or ITP keyset will flash slow
RED.
The keyset cannot make or receive any
calls. When in this mode the HOLD key of
an iDCS, DS or ITP keyset will light steady
RED.
DISPLAY
[201] STN LOCK
UNLOCKED
[205] STN LOCK
UNLOCKED
[ALL] STN LOCK
??
[205] STN LOCK
LOCKED OUT
Table of Contents
PROGRAMMING
PART 2 APRIL 2007