Samsung OfficeServ 7100 Technical Manual page 335

OfficeServ 7100
TECHNICAL MANUAL
MMC: 728
DESCRIPTION:
Allows the system administrator or technician to associate a CID or ANI number
received from the central office with a name programmed in this translation table. If
there is no match between a received number and a name in this table, "no CID
name" will be displayed.
The translation table consists of 1000 entries for a OfficeServ 7100 system. Each
entry is comprised of a ten-digit (14 digits allowed) telephone number and a 16-digit
name.
Names are written using the keypad. Each press of a key will select a character.
Pressing the next key will move the cursor to the next position. For example, if the
directory name is "SAM SMITH," press the number "7" three times to get the letter
"S." Now press the number "2" once to get the letter "A." Continue selecting
characters from the table below to complete your message.
NOTE: When the character you want appears on the same dial pad key as the
previous character, press the VOL UP key to move the cursor to the right.
iDCS, DS and ITP KEYSETS
•
COUNT
DIAL 0
DIAL 1
DIAL 2
DIAL 3
DIAL 4
DIAL 5
DIAL 6
DIAL 7
DIAL 8
DIAL 9
DIAL
1. When the character you want appears on the same dial pad key as the previous
character, press UP to move the cursor one space to the right.
2. Other symbols are available for DIAL #.
CID / ANI TRANSLATION TABLE
1 2
< >
space ?
A B
D E
G H
J K
M N
P Q
T U
W X
: =
Home Page
PART 2 JANUARY 2009
3 4
. )
, !
C @
F #
I $
L %
O ^
R S
V
Y Z
[ ]
Table of Contents
PROGRAMMING
5
0
1
2
3
4
5
6
7
8
9