Samsung OfficeServ 7100 Technical Manual page 24

OfficeServ 7100
TECHNICAL MANUAL
MMC: 103
DESCRIPTION:
Allows the system administrator to change the answer mode of any keyset. Each
keyset can have its answer mode set to one of the following options:
0. RING: The keyset will ring in one of eight custom ring patterns. Calls are
answered by pressing the ANS/RLS key or by lifting the handset.
1. AUTO: After giving a short attention tone, the keyset will automatically answer
calls on the speakerphone. When a C.O. line is transferred to a keyset in
Auto Answer, the screened portion of the call will be Auto Answer, but
the keyset will ring when the transfer is complete if the user has not
pressed the ANS/RLS key or lifted the handset.
2. VOICE: The keyset will not ring. After a short attention tone, callers can make an
announcement but the ANS/RLS key or handset must be used to
answer calls.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION
1. Press TRANSFER 103
Display shows
2. Dial keyset number (e.g., 205)
OR
Press UP or DOWN to select keyset
and press RIGHT soft key to move cursor
OR
Press ANS/RLS to select All.
Home Page
PART 2 APRIL 2007
SET ANSWER MODE
DISPLAY
[201] ANS MODE
RING MODE
[205] ANS MODE
RING MODE
[ALL] ANS MODE
?
Table of Contents
PROGRAMMING