Samsung OfficeServ 7100 Technical Manual page 289

OfficeServ 7100
TECHNICAL MANUAL
MMC: 717
DESCRIPTION:
This MMC defines the home area code and country code for the OfficeServ 7100
system. This information is used for caller ID, ANI and ISDN calls in defining the area
code on incoming calls. This MMC removes the local area code to allow callback
without digit modifications in LCR.
NOTE: If 10 digit local dialing is used My Area Code is not used. If 7 digit local dialing
is used, then My Area Code is used and removes the area code.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Moves cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION
1. Press TRANSFER 717.
Display shows.
2. Enter area code (maximum 4 digits) via dial
keypad (e.g., 2) and press RIGHT soft key to
move cursor back to step 2.
3. Press UP or DOWN to select country. Enter 1
for USA.
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: NONE
RELATED ITEMS: TRUNK PROGRAMMING
Home Page
PROGRAMMING
PART 2 APRIL 2007
MY AREA CODE
DISPLAY
MY AREA CODE
AREA :
MY AREA CODE
AREA: 2
MY AREA CODE
COUNTRY :1
Table of Contents