Samsung OfficeServ 7100 Technical Manual page 312

OfficeServ 7100
TECHNICAL MANUAL
MMC: 724
DESCRIPTION:
This MMC allows the technician to change directory numbers for stations, trunks,
station groups, trunk groups and feature access codes. The system can be
preprogrammed with a default three or four digit numbering for station, station
groups and trunk numbers depending on the position of the DIP switches on the
MP10 or MP10a card. Default numbering plan is only assigned once the system is
powered up for the first time OR once the system memory has been manually
cleared. There is an error message provided to prevent the accidental duplication
of a directory number or feature access code.
DIAL OPTION
0 STN NUMB.
1 TRK NUMB.
2 VMAA NUMB.
3 MISC NUMB
4 MGI NUMB.
6 MOBEX NUM
7 GROUP NUMBER
DIAL NUMBERING PLAN
[Applies to v.4.30 or Higher]
This is where DLI, SLI, Virtual DLI (VDL), Virtual SLI
(VSL), ITP, WIP, and SIP Station directory numbers
are changed or assigned
This is where Analog (TRK), PRI, SPNET (NET),
SIP, and H.323 (323) trunk directory numbers are
changed or assigned
This is where the embedded SVM directory numbers
are changed or assigned
This is where directory numbers for relays, MOH
ports, and the Internal Modem are changed or
assigned
This is where the MGI port directory numbers are
changed or assigned.
This is where MOBEX directory numbers are
changed or assigned.
NOTE: MOBEX ports are paired internally, meaning
that it is only necessary to number the odd-
numbered MOBEX ports (e.g. 1, 3, 5, 7)
This is where station group and trunk group
directory numbers are changed or assigned. Station
groups are denoted by a SGR prefix and Trunk
groups are denoted by a TGR prefix.
Home Page
PART 2 MAY 2009
DESCRIPTION
Table of Contents
PROGRAMMING