Samsung OfficeServ 7100 Technical Manual page 286

OfficeServ 7100
TECHNICAL MANUAL
MMC: 715
DESCRIPTION:
Allows custom messages to be programmed or default messages to be changed.
Messages are written via the keypad. Each press of a key will select a character.
Pressing a different key will move the cursor to the next position. For example, if the
message is "Sunbathing," press the number "7" three times to get the letter "S."
Now press the number "8" twice to get the letter "U." Continue selecting characters
from the table below to complete your message. Pressing the "A" key will change
the letter from upper case to lower case.
NOTE: When the character you want appears on the same dial pad key as the
previous character, press the UP key to move the cursor to the right or the DOWN
key to move the cursor to the left. A space can be entered by using these keys.
iDCS, DS and ITP KEYSETS
•
COUNT
DIAL 0
DIAL 1
DIAL 2
DIAL 3
DIAL 4
DIAL 5
DIAL 6
DIAL 7
DIAL 8
DIAL 9
DIAL
1. When the character you want appears on the same dial pad key as the previous
character, press UP to move the cursor one space to the right.
2. Other symbols are available for DIAL #.
There are 15 messages in a OfficeServ 7100. They fall in the following categories:
MESSAGES 01-10 (16 character default messages): These are preprogrammed
default messages. Any of them can be changed.
PROGRAMMED STATION MESSAGE
1 2
< >
space ?
A B
D E
G H
J K
M N
P Q
T U
W X
: =
Home Page
PART 2 APRIL 2007
3 4
. )
, !
C @
F #
I $
L %
O ^
R S
V
Y Z
[ ]
Table of Contents
PROGRAMMING
5
0
1
2
3
4
5
6
7
8
9