Samsung OfficeServ 7100 Technical Manual page 363

Hide thumbs Also See for OfficeServ 7100:

OfficeServ 7100

TECHNICAL MANUAL

DESCRIPTION:

This MMC extends system Least Cost Routing tables to accommodate sites with

very large networks or where specialized dialing formats are required. It uses a table

of 198 entries containing telephone numbers that can be optionally translated and

sent to a custom destination. The options are as follows:

0. IN DIGIT:

1. OUT DIGIT:

2. USE LCR NUM: This option determines which E-LCR FEATURE CODE should

This option determines the dial string to match on. This

number will be dialed after dialing an E-LCR FEATURE CODE.

Up to 16 digits may be entered into this field.

This is the digit string that will be sent to the NEXT ROUTE

instead of the IN DIGITS. Up to 16 digits may be entered into

use this digit translation. Valid entries are as follows:

All E-LCR feature codes will use this translation. This is the

default setting.

Enter the E-LCR1 FEATURE CODE from MMC 724. This

setting makes the digit translation active only for calls that

are dialed after the E-LCR1 FEATURE CODE.

Enter the E-LCR2 FEATURE CODE from MMC 724. This

setting makes the digit translation active only for calls that

are dialed after the E-LCR2 FEATURE CODE.

Enter the E-LCR3 FEATURE CODE from MMC 724. This

setting makes the digit translation active only for calls that

are dialed after the E-LCR3 FEATURE CODE.

Enter the E-LCR4 FEATURE CODE from MMC 724. This

setting makes the digit translation active only for calls that

are dialed after the E-LCR4 FEATURE CODE.

PART 2 JANUARY 2009

Table of Contents