Samsung OfficeServ 7100 Technical Manual page 407

OfficeServ 7100
TECHNICAL MANUAL
MMC: 829
DESCRIPTION:
This program sets the various parameters required for printing to a LAN connected
device (PC or printer).
The eight types of data listed below can be displayed using the LAN printer or PC.
REPORT
[01] SMDR
[02] UCD REPORT
[03] TRAFFIC REPORT
[04] ALARM REPORT
[06] PERIODIC UCD
Ports 5100 ~ 5106 are fixed and are displayed in the "LAN TCP" field below.
The items that are set in this program are listed below.
00 DATA TYPE
01 CURR STATUS
02 EMPTY BUFF
03 UPDATE LAN
04 DESTINATION
05 PRINTER IP
06 PRINTER TCP
07 LAN TCP
08 RETRY COUNT
09 RETRY WAIT
10 PJL ENABLE
11 LANGUAGE
12 PAPER SIZE
13 FONT TYPE
LAN PRINTER PARAMETER
LAN TCP PORT
(TCP port of MCP providing the service)
5100
5101
5102
5103
5105
Type of data to be displayed (01~06 above)
Current status of the LAN printer (READ ONLY FIELD)
When "DESTINATION" is PC, this field will display "OFF" until PC is
connected.
Prints all data left in the buffer
Applies modified items
When making any TCP/LAN related parameter, select "YES" to update
LAN (and save) for changes to take effect.
Select the device where your report prints.
Sets the IP address of the LAN printer
Enter TCP port of printer (see printer manufacturer specifications)
Displays LAN TCP port of the associated service shown in table above
(READ ONLY)
Retransfer attempt count (00~10)
Wait time for retransfer(005~250 sec)
Sets PJL (0. FALSE, 1. TRUE)
Printer language(0. RAW, 1. PCL, 2. PS)
Paper size (0. A4, 1. LETTER)
Font type (0. COURIED, 1. TIMES NEW ROMAN)
Table of Contents
Home Page
PROGRAMMING
PART 2 APRIL 2007