Samsung OfficeServ 7100 Technical Manual page 342

OfficeServ 7100
TECHNICAL MANUAL
SPNET STN
MOBEX STN
STN GROUP
PSTN TRUNK
VOIP TRUNK
SPNET TRUNK
NOTE:
If during any test procedures you need to run the OfficeServ 7100 system with a
default database and power up with this MMC option set to YES the SVM database
will be overwritten according to the data in MMC 741 and the default numbering
plan.
PROGRAM KEYS
UP & DOWN
KEYPAD
SPEAKER
ACTION
1. Press TRANSFER 740.
Display shows.
2. Press UP or DOWN to select a setting
OR
Press RIGHT soft key to set auto setup
5. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: SVM AUTO SETUP:
DOWNLOAD OPTIONS
MMC: 740
Create Extension blocks for all SPNET stations. Also creates
Mailbox blocks for any SPNET station where MBX is set to
YES in MMC 824
Download the information for MOBEX ports according to
MMC 741
Download the information for Station Groups according to
MMC 741
Writes all LOOP, T1, and PRI trunks to the SVM Trunks table
Writes all SIP and H.323 trunks to the SVM Trunks table
Writes all SPNET trunks to the SVM Trunks table
Changes MMC data between YES and NO
0 and 1 will change data and advance to other option
Used to store data and advance to next MMC
STATION NAME:
DLI/SLI:
DESKTOP ITP:
Home Page
DISPLAY
SVM AUTO SETUP
YES
DOWNLOAD OPTIONS
STATION NAME:YES
YES
YES
YES
NO
Table of Contents
PROGRAMMING
PART 2 MAY 2009