Samsung OfficeServ 7100 Technical Manual page 337

Hide thumbs Also See for OfficeServ 7100:

OfficeServ 7100

TECHNICAL MANUAL

DESCRIPTION:

The RATE CALCULATION TABLE is used to define the billing charges for each

COST RATE. These rate tables correlate with the Trunk Cost Rate and the Costing

Dial Plan. There are eight call costing rates. Each rate has the following data fields.

FIRST INTERVAL DURATION: This is the amount of time at the beginning of each

call to which a fixed cost is applied. The range is from 0 to 999 seconds, for

example, 180 seconds (three minutes).

FIRST INTERVAL COST: This is the dollar cost for the first interval duration. The

range is from 0 to 999, for example, 345 ($3.45).

SECOND INTERVAL DURATION: This is the amount of time for the duration of each

billing increment after the first interval has expired. The range is from 0 to 999

seconds, for example, 006 seconds (six seconds).

SECOND INTERVAL COST: This is the dollar cost for each billing increment. The

range is from 0 to 999, for example 100 ($1.00).

SURCHARGE: This is a one-time charge that is applied to the call over and above

the time charges. The range is from 0 to 999, for example 150 ($1.50).

PROGRAM KEYS

1. Press TRANSFER 729.

Display shows COST RATE and FIRST

INTERVAL DURATION.

RATE CALCULATION TABLE

Used to scroll through options

Used to enter selections

Move cursor left and right

Used to store data and advance to next MMC

Used to clear previous entry

Used to select all

COST RATE [1]

Table of Contents

PART 2 APRIL 2007