HUAWEI TE30 Videoconferencing Endpoint
User Guide
13.6 Setting the Number Key Functions
You can configure the number keys on the remote control for two-stage dialing or camera
preset control.
When your TE30 is not in a conference, and the display is in full screen mode, the number
keys on the remote control do not support two-stage dialing and can only be used to control
camera presets.
Procedure
Step 1 Choose Advanced Settings > Settings > General > Select number key function and set the
number key function.
Step 2 Select Save.
----End
13.7 Using Diagnostics Methods
On the TE30, you can perform the following diagnostic tests: sound and color bar tests,
network tests, loopback tests, and remote control tests.
Choose Advanced Settings > Diagnostics. Use the diagnostics methods provided on the
displayed Diagnostics screen.
Figure 13-4
Figure 13-4 TE30 diagnostics model
Figure 13-4
network transception module.
Issue 01 (2013-03-27)
Second Dial: Follow the instructions to press number keys to perform two-stage dialing.
Control camera preset: Press a number key to move the camera to the preset bound to
that key.
To toggle between these two options, press
shows the TE30 diagnostics model.
shows the diagnostics of three modules: audio module, video module, and
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
on the remote control.
13 Maintenance
115