Huawei V100R001 User Manual page 51

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Video
resolution
Video frame
rate
Video
resolution
Prevent little
packet loss
Enable H.239
H.239 video
protocol
Issue 01 (2013-03-27)
Description
at your site.
 If you select Auto, Video
resolution is available.
 If you do not select Auto, you
must also set Video resolution
and Video frame rate.
Specifies the video format. The
available options vary depending
on your settings of Video
protocol.
When Video protocol is set to
Auto, set this parameter to either
of the following:

Smooth: Your TE30 uses a
high frame rate to ensure
smooth video.

Sharp: Your TE30 uses a high
video resolution to ensure clear
video.
Specifies the frame rate used
during video encoding.
Video is smoother at a higher
refresh rate. Video at a lower
frame rate is clearer.
Specifies the video resolution.
 Smooth: Your TE30 uses a
high frame rate to ensure
smooth video.
 Sharp: Your TE30 uses a high
video resolution to ensure clear
video.
Specifies whether to prevent little
packet loss to avoid artifacts.
Specifies whether you can share
presentations during conferences.
NOTE
You can set H.239 video protocol, ,
H.239 video bandwidth typeH.239
video resolutionH.239 video
bandwidth(%)Presentation
plug-and-share.
Specifies the video protocol your
TE30 uses to encode presentations.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Conference
Setting
The default value is Auto.
The default value is Auto.
It is recommended that you retain
the default value.
The default value is Smooth.
This parameter is deselected by
default.
If the participant endpoints are on
the same private network, select
this parameter.
This parameter is selected by
default.
The default value is Auto.
43