Huawei V100R001 User Manual page 17

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Display IP
address
Select
conference
control
operation
Display
position
Display
duration
Display time
and zone
Font color
Font size
Font Type
Bold
Set the
horizontal
offset
Set the
vertical
offset
Issue 01 (2013-03-27)
Description
If you set the parameter to Opaque, no
background photograph is displayed on
the menu screen.
If you st this parameter to values other
than Opaque, a background photograph
is displayed behind the menu screen with
a degree of transparency corresponding
to the value chosen.
Specifies whether to display the local IP
address on the conferencing screen.
Specifies the conference controls to
display on the Conference Control
screen.
Specifies the display position for the site
name superimposed on the local video.
Specifies the duration to display the site
name.
Specifies whether to superimpose the
time zone and time on the video of your
site after your site joins a conference.
Specifies the color in which the site
name is displayed.
Specifies the font size for the site name
display.
Specifies the typeface for the site name.
This parameter is available only when
Language is set to 中文(简体).
Specifies whether the site name is
displayed in bold.
Fine-tunes the site name's location
leftward and rightward on the video.
Fine-tunes the site name's location
upward and downward on the video.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Installation and Initial Configuration
Setting
This parameter is selected by
default.
-
The default value is Lower
right corner.
The default value is Always
display.
This parameter is deselected by
default.
The default color is white.
The default value is Medium.
The default value is Boldface.
This parameter is deselected by
default.
Value range: 0-96.
The default value is 48.
Value range: 0-96.
The default value is 48.
9