Huawei V100R001 User Manual page 62

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Area code
Line 1 #1
Line 1 #2
Line 2 #1
Line 2 #2
Line 3 #1
Line 3 #2
Step 5 Select Save.
The new site is listed in Address Book.
----End
Creating a Group
If certain sites regularly join the same conference, you can define these sites as a group.
Step 1 From the Address Book screen, select All Groups.
Step 2 If no groups are displayed, select Add Group. If groups are displayed, select
any group.
Step 3 In Create Group, name the group.
Step 4 Select the sites you wish to add to the group.
A selected site has a tick (√) displayed before it and is listed in the group box.
Step 5 Select Save.
The new group is listed in the group list of the Address Book screen.
----End
Issue 01 (2013-03-27)
Description
Specifies the area code for the site.
Set this parameter based on your
Country/Region code settings.
This parameter is required when
Type is set to ISDN or PSTN.
Specify the numbers used by your
TE30 to call the site. These
parameters are available only for
ISDN sites. You can set two
numbers for each BRI line.

When the ISDN site rate is set
to a value ranging from 64
kbit/s to 512 kbit/s, set Line 1
#1 only, because you only need
to dial that number to call the
site.
 If the ISDN site rate is set to 2,
3, 4, 5, or 6 x 64 kbit/s, set the
other required parameters as
well, because you need to dial
the BRI line numbers one by
one to call the site. Line 1 #2
specifies the second number of
the first BRI line.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Conference
Setting
No default value is set for this
parameter.
No default value is set for
these parameters.
next to
54