Huawei V100R001 User Manual page 43

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Step 2 Touch and hold the button in the center of the VPM220 top surface for 5 seconds.
A confirmation dialog box is displayed.
Step 3 Select Confirm.
The VPM220W sets up a WPS connection with the TE30 and attempts to obtain an IP address.
After the VPM220W obtains an IP address, its indicator is steady blue.
----End
The status indicators can quickly provide information about the VPM220W working status.
Table 5-3
Table 5-3 Indicator status
Indicator Status
Microphone indicators all red
Microphone indicators all blue
Microphone indicators off
Microphone indicators blinking blue in turn
clockwise
Microphone indicators blinking blue at the
same time
Wi-Fi indicator steady red
Wi-Fi indicator blinking red
Battery level indicator off
Battery level indicator red
Battery level indicator blinking red
Charging status indicator blinking blue
slowly
Charging status indicator steady blue
Charging status indicator off
Issue 01 (2013-03-27)
describe the status indicator.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Microphone and Speaker
VPM220W Status
Microphones in all the three directions are
muted and working correctly (not in sleep
mode).
Microphones in all the three directions are
unmuted and working correctly (not in sleep
mode).
The VPM220 is in sleep mode or powered
off.
The VPM210W starts properly and is
obtaining an IP address.
The VPM220W is reconnecting to the
TE30.
The VPM210W is being upgraded.
The Wi-Fi connection is faulty or Wi-FI
signal is weak.
The VPM220W cannot connect to the TE30
over Wi-Fi.
The battery level is normal.
The battery level is lower than 3.65 V.
The battery level is lower than 3.4 V.
The VPM220W is being charged.
Charging is complete.
The VPM220W is not placed on the charger
dock.
35