Huawei V100R001 User Manual page 65

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Managing the LDAP Network Address Book
With the LDAP directory server parameters set correctly, the TE30 can access the LDAP
server and search sites in the LDAP network address book.
Configuring the LDAP Directory Server
Step 1 Choose Advanced Settings > Settings > Network > Network Address Book > LDAP
Server. Set the LDAP directory server parameters by referring to
Table 6-6 LDAP directory server parameters
Parameter
Server address
Port
Base DN
(distinguished
name)
Authentication
type
SSL encryption
User name
Password
Domain name
Synchronize
automatically
Issue 01 (2013-03-27)
Description
Specifies the IP address of the LDAP
directory server.
Specifies the port used to connect to the
LDAP server.
Specifies the distinguished name (DN) of
the entry at which a specified search
starts.
Specifies the user name and password
used for LDAP server authentication. You
can select between General, Secured,
and Anonymous.
 General: Use the user name and
password for authentication.
 Secured: Perform authentication,
including authentication on digital
certificates, based on the Secure
Sockets Layer (SSL) protocol.
 Anonymous: The LDAP directory
server is accessible to all users.
Specifies whether the SSL protocol is
used to encrypt data streams sent to and
received from the LDAP directory server.
Specifies the user name and password
used for LDAP directory server
authentication.
Specifies the domain name used for
LDAP directory server authentication.
Specifies whether your TE30 regularly
updates the LDAP Address Book entries
in the local address book.
If you select this parameter, you must also
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Conference
Table 6-6.
Setting
The default value is
127.0.0.1.
The default value is 389.
No default value is set for
this parameter.
The default value is
General.
This parameter is
deselected by default.
The default values are both
admin.
The value can consist of
numbers, letters, Chinese
characters, and special
symbols, such as @ # %.
No default value is set for
this parameter.
This parameter is selected
by default.
57