Blomberg WM 77110 NBL00 Owner's Manual page 40

Clanking noise in the
drum.
Water fill temperature is
incorrect.
Detergent residue left on
the laundry.
Clothes get tangled up
too much in the drum
when washing.
Load is wrinkled.
Metal objects such as coins, pins
may be in the drum.
Water inlet hoses or valves may
be clogged.
There may be a long distance
between the water heater and
washer.
There may be a problem with
water heater.
Excessive laundry might have
been loaded in.
Wrong program cycle and
temperature might have been
selected.
Using insufficient amount of
detergent.
Using powder or granular
detergents in cold water washing
may leave residue on wash load.
Using wrong type of detergent.
Excessive laundry might have
been loaded in.
Washing many items of the same
type or size of clothes together.
Delay in unloading the washer.
Wrong program cycle might have
been selected.
Excessive laundry might have
been loaded in.
40
Stop the program cycle (See
"Cancelling a Program") ,check the
drum for any foreign objects.
Disconnect inlet hoses from the
valves. Clean inlet strainers and valve
filters of any debris.
Run the hot water faucets in the
bathroom or kitchen (whichever is
close to the location of your washer)
for a short time to purge the hot
water line.
Be sure that your water heater is
delivering hot water min 120F (49C)
at the faucet.
Do not load the washer in excess.
Select the proper program cycle
and temperature for the laundry to
be washed (See "Laundry Tips" &
"Program Cycle Selection").
Use the recommended amount of
HE detergent appropriate for water
hardness and soil level of laundry.
Try to use a liquid detergent when
washing in cold water.
Use liquid detergent for cold wash
cycle for good wash results. Use
proper detergents recommended for
wools, handwashable and delicate
items.
Do not load the washer in excess.
Load the wash drum with items of
different sizes.
Unload the washer as soon as the
wash cycle ends.
Select the proper program cycle
for the laundry to be washed (See
"Laundry Tips" & "Program Cycle
Selection").
Do not load the washer in excess.
EN