Blomberg WM 77110 NBL00 Owner's Manual page 38

Front-loading automatic washer
Table of Contents

Advertisement

Clothes are stiff and/
or do not smell like the
fabric softener.
Color of the clothes
faded.
Using insufficient amount of
detergent.
Softener being released early.
The detergent may have
been placed into the wrong
compartment; the detergent may
be mixed with the softener.
A higher temperature might have
been selected.
Exposure of laundry to undiluted
liquid chlorine bleach.
Excessive laundry might have
been loaded in.
38
If the water hardness is higher, using
insufficient amount of detergent can
cause the laundry to become stiff
in time. Use appropriate amount of
detergent according to the water
hardness.
You may have added too much
softener beyond max fill line.
The detergent dispenser might be
problematic. Water may be siphoned
(pulling the softener into the washer
early) during the fill or rinse cycles.
There might be problems with the
water inlet valves.
Softener should not come into
contact with detergent / bleach when
being added.
Select the proper program and
temperature according to the type
and soiling degree of the laundry
(See "Laundry Tips" & "Program
Cycle Selection").
Do not pour undiluted liquid bleach
onto laundry. Always pour it into
bleach compartment of the dispenser
prior to beginning of the wash cycle .
Do not overfill the bleach
compartment. Fill up to max line at
the most.
Do not load the washer in excess.
EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm 77120 nbl01Wm 87120 nbl00

Table of Contents