Table of Contents
Advertisement
To prevent accidents and machine damage, read these
instructions before installation or use. Use the washer only as
instructed in this owner's guide and installation instructions
included with your washer. Keep this guide for future
reference
Front-Loading Automatic Washer
WM 67121 NBL00
Owner's Guide & Installation Instructions
Advertisement
Table of Contents
Related Manuals for Blomberg WM 67121 NBL00
Summary of Contents for Blomberg WM 67121 NBL00
- Page 1 To prevent accidents and machine damage, read these instructions before installation or use. Use the washer only as instructed in this owner’s guide and installation instructions included with your washer. Keep this guide for future reference Front-Loading Automatic Washer WM 67121 NBL00 Owner’s Guide & Installation Instructions...
- Page 2 Please read this guide first! Dear Customer, We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results. Therefore, we advise you to read through this document carefully before using your product and keep it for future reference.
-
Page 3: Table Of Contents
9 WARRANTY STATEMENT Laundry Tips ....15 FOR THE BLOMBERG CLOTHES Preparing the laundry... . .16 Loading the washer . -
Page 4: Your Washer
Overview 1 - Detergent Dispenser 4 - Control Panel 2 - Loading Door 5 - Filter Cap 3 - Top Lid 6 - Height-adjustable Feet... -
Page 5: Specifications
Specifications Front Loading Automatic Washer Models WM67121NBL00 Height (in/cm) 33 (85) Width (in/cm) 23 (59.5) Depth (in/cm) 21 (54) Net Weight (lbs/kg) 156 / 71 Electricity (V/Hz.) 208-240 / 60 Total Current (A) Total Power (W) 2350 Spinning cycle (rpm max.) 1200 Water pressure (psi)/(bar) 15-145 psi (1-10) bar Drain height (ft.)/(m.) -
Page 6: Important Safety Instructions
Important Safety Instructions • Do not tamper with controls. B WARNING - To reduce the risk of fire, • Do not repair or replace any electric shock or injury to persons part of the appliance or attempt while using your appliance follow any servicing unless specifically basic safety precautions, including recommended in the user- the following: maintenance instructions or in... - Page 7 fume which may cause death. • Always be sure to empty all foreign • Do not operate this appliance if it is materials from the pockets of your damaged, malfunctioning, partially clothing as small items such as coins, disassembled, or has missing or pins etc could severely damage the broken parts, including a damaged appliance.
- Page 8 • All broken and faulty components, panels and parts must only be replaced with original Blomberg spare parts by a Blomberg Service technician. • Do not force the washer door open when it is locked. The door must be closed any time during the programme cycle.
-
Page 9: Installation Instructions
Installation Instructions • It is not recommended to install and Read this first ! operate the washer on a wooden This washer can be individually installed floor or soft floor. If you have to install in free-standing and built-in installations. your washer on a wooden or frame You can also install your washer with construction floor, the floor must be your dryer as a free-standing or built-in... -
Page 10: Allowable Clearances For Undercounter Installation
Tilt the washer to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. Minimum counter width should be 50” (127 cm) for a pair of Blomberg washer & dryer. Custom undercounter installation – Washer & Dryer Removing shipping bolts... -
Page 11: Levelling The Washer
(208-240V, 60Hz) located on the appliance. For this purpose, a junction box (as seen in picture below) must be obtained. Junction box is supplied with Blomberg Electrical Connection Clothes Dryer (model no: DV 16540 NBL00) and it works as a... -
Page 12: Power Supply And Circuit
B WARNING – Be sure to unplug A WARNING – Be sure that the water the power cable before attempting connection of this washer is handled maintenance or cleaning of your by a qualified service technician or a appliance to minimize the risk of plumber. -
Page 13: Drainage
An additional clip etc can be used for faucet/hose and hose/inlet valve safe connection. connections). • Drain hose may also be connected to • Always use genuine “Blomberg” a minimum 1.26 in (32 mm) diameter water supply hoses when connecting stand pipe. with this washer. Old or worn-out • Be sure to secure the drain hose hoses must not be reused. -
Page 14: Transportation
• Washer must be properly leveled by C Packing materials are made of using the adjustable feet. biodegradable and recyclable • Water inlet hoses are connected substances. You should consult your to the water faucets, secured and local authority or dealer about the checked for any leaks by turning on environmental-friendly disposal of the both faucets. packaging of your appliance. • Drain installation is done properly and drain hose is checked and secured to Appliance Disposal... -
Page 15: Operating Instructions
Operating Instructions First Use C Wash the items which are care B WARNING – To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this Normal wash Permanent Gentle/Delicate setting Press or Wrinkle setting appliance. -
Page 16: Preparing The Laundry
extended contact of damp clothes capacity of the selected program before or after washing to prevent cycle. Washing results are adversely dye transfer. affected by an overloaded drum. Overloading may also cause wrinkling C Wash heavily and lightly soiled items and abrasion on clothes. -
Page 17: Detergent Use
Detergent Use Light soiling No visible stains or soiling About Detergent Normal soiling C Your washer is designed to use only A few visible light stains or soiling HE (high efficiency) detergents. You Heavy soiling should always look for the following Highly visible stains or soiling symbol on the label of detergents: If you use a non-HE detergent with this Detergent Dispenser washer, high sudsing will occur. -
Page 18: Water Consumption
on the package. right compartment of the dispenser. This container ensures dispensing and If you use a liquid detergent, be sure dilution of bleach during the first rinse to use a HE (High efficiency) detergent of wash cycle. There is a maximum fill and add detergent directly to main line on the container. -
Page 19: Selecting A Program And Operating Your Washer
Selecting a program and operating your washer Control panel 7 - Power button 8 - Program follow-up indicator 9 - Display 10 - Cycle selection knob 11 - Start/Pause/Cancel Button 12 - Auxiliary Function Buttons 13 - Time Delaying Button (+/-) 14 - Spin Speed Adjustment Button Program cycle selection Turning the washer on Select the appropriate program cycle Prepare the washer for program... -
Page 20: Program Cycle Selection Table
Program Cycle Selection Table White and colorfast items made of cotton and linen 163F / Sanitary (baby clothes, Heavy 1200 Full • R, S, Q 77 73°C garments, sheets, pillowcases, kitchen towels, tablecloths) Cottons/ Temp 145F / Heavy 1200 Full •... -
Page 21: Wash Cycles
Selectable options of a wash cycle are • Permanent Press extra rinse “R”, superwash “S” and You can wash your easy care items on quickwash “Q”. this cycle. Washes with gentler tumbling 1. Even if there is no hot water system, movements and in shorter washing hot water inlet must still be connected cycles. -
Page 22: Auxiliary Functions (Options)
items when you want to pre-treat them. Auxiliary function selection Cycle soaks the laundry in a relatively You should not select Quickwash high amount of warm water for two and Superwash at the same time. hours approximately. You can use full Superwash will be cancelled and load and HE “High efficiency” main Quickwash will remain active in such a wash detergent for this cycle. -
Page 23: Changing The Delay Time
Progress of program steps of three hours for the remainder (1, 2, 3, 6, 9, …24). Progress of a running program is shown through the program follow-up indicator. 1. Open the loading door, place At the beginning of every program step, the laundry inside and fill detergent the relevant indicator lamp will light up disperser. -
Page 24: Child-Proof Lock
Ending the program through machine to “Pause” mode in order to change the spin speed. New spin canceling speed can be selected. Spin speed “Start/Pause/Cancel” button is pressed selection can be changed until the for 3 seconds to cancel the program. end of final rinse cycle. “Ready” warning lamp flashes during canceling and “End”... -
Page 25: Quick Instructions For Daily Use
Quick instructions for daily use Preparation 2. Open the loading door and put in 1. Turn on both hot and cold water more laundry. faucets fully. Check and be sure the 3. Close the loading door. water connection is tight. 4. Press “Start/Pause/Cancel” button. -
Page 26: User Maintenance Instructions
User maintenance instructions A WARNING – Be sure to unplug the power cable before attempting maintenance or cleaning of your appliance to minimize the risk of electric shock. Cleaning detergent dispenser Remove any powder/liquid residue buildup in the dispenser drawer. To do this;... -
Page 27: Cleaning The Water Inlet Strainers
may have to clean it occasionally to C Never use a sponge or scrubbing prevent any clogging. Water must be material. These will damage the drained completely to clean the pump painted and plastic parts. filter. Cleaning the water inlet In addition, water may have to be strainers drained off completely in the following... -
Page 28: Descaling The Washer
below: To prevent scaling, wash drum • Pull out the emergency drain hose should be cleaned frequently. Do not from its housing. use abrasive materials such as metal wool while cleaning the drum. Take the manufacturer’s instructions into account if you are using a descaling agent. Descaling agents may contain materials that are hazardous for washer components. -
Page 29: Troubleshooting
Troubleshooting Problem Cause Explanation / Suggestion There may be some water in your It is not harmful to your washer. You appliance when you receive it. should run a “sanitary” cycle without Water in the washer. This is from the quality control any clothes and laundry additives process and is normal. - Page 30 Be sure the strainers and rubber Inlet hose connections may be seals of the water inlet hoses are leaking. solid and securely fitted. End of the drain hose may be Tightly attach the drain hose to the loosely inserted into the waste waste pipe or sink (See “Installation pipe or sink.
- Page 31 The washer will wait until there is a sufficient amount of water, which Water pressure may be low. may lengthen the cycle time to avoid poor washing results due to insufficient water. Cycle time is lengthened to avoid Supply voltage may be low. poor washing results when the supply voltage is low.
- Page 32 The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum. The laundry in the drum may be It continuously spins. There may be an imbalance of tangled up too much. Laundry Remaining time does not load in the drum.
- Page 33 The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum. No spinning is performed when the laundry is There may be an imbalance of not evenly distributed in the drum load in the drum.
- Page 34 Select the proper program cycle Wrong program cycle and and temperature for the laundry to temperature might have been be washed (See “Laundry Tips” & selected. “Program Cycle Selection”). Use the recommended amount of Using insufficient amount of HE detergent appropriate for water detergent. hardness and soil level of laundry. Use liquid detergent for cold wash cycle for good wash results.
- Page 35 If the water hardness is higher, using insufficient amount of detergent can Using insufficient amount of cause the laundry to become stiff detergent. in time. Use appropriate amount of detergent according to the water hardness. You may have added too much softener beyond max fill line. Clothes are stiff and/ The detergent dispenser might be or do not smell like the...
- Page 36 There may be an imbalance of laundry in the machine. The laundry in the drum may be tangled up too much. Laundry should be Intermediate spins may be rearranged and re-spun. No spinning skipped. is performed when the laundry is not evenly distributed in the drum to prevent any damage to the appliance and to its environment.
- Page 37 Stop the program cycle (See Clanking noise in the Metal objects such as coins, pins “Cancelling a Program”) ,check the drum. may be in the drum. drum for any foreign objects. Disconnect inlet hoses from the Water inlet hoses or valves may valves. Clean inlet strainers and valve be clogged.
-
Page 38: Warranty Statement For The Blomberg Clothes Washers
5 business days after delivery of the product to the home, whichever is later. Lifetime limited warranty from date of first installation * ++ (parts only) Blomberg will repair ++Parts replaced will assume the identity of the or replace to the original owner the stainless original parts + their original warranty. -
Page 39: How To Get Service
HOW TO GET SERVICE Please contact the Distributor for your State or Province as listed on the Distributor Contact List, or call our Toll Free Number at 1 800 459 9848 for direction to an Authorized Blomberg Service Agent.