Related Manuals for Blomberg WNF63211
Summary of Contents for Blomberg WNF63211
-
Page 1: Washing Machine
Washing Machine WNF63211 User‘s Manual Document Number 2820524674/ 08-04-15.(12:39) - Page 2 Please read this user manual first! Dear Customer, Thank you for prefering an Blomberg product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1 General safety instructions 5.8 Spin speed selection....23 5.9 Programme and consumption table..24 1.1 Life and property safety ....4 5.10 Auxiliary function selection . -
Page 4: General Safety Instructions
General safety instructions This section includes security instructions which may help prevent the injuries and material damage risks. All kinds of warranties shall be invalid if these instructions are not observed. 1.1 Life and property safety • Never place the product on a carpet-covered floor. Electrical parts will get overheated since air cannot circulate from under the device. -
Page 5: Electrical Safety
Important instructions for safety and environment • Do not forget to close the loading door when leaving the room where the product is located. • store all detergents and additives in a safe place away from the reach of the children by closing the cover of the detergent container or sealing the detergent package. -
Page 6: Hot Surface Safety
Important instructions for safety and environment 1.4 Hot surface safety While washing the laundry at high temperatures, the loading door glass will get hot. Considering this fact, during washing operation keep the children away from the loading door of the product to prevent them .touching it 1.5 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). -
Page 7: Your Washing Machine
Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Blomberg Model name WNF63211 Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) 0.847... -
Page 8: Overview
Your washing machine 2.2 Overview 1- Power cable 2- Top panel 3- Control panel 4- Filter cap 5- Adjustable feet 6- Loading door 7- Detergent drawer 8- Drain hose 8 / EN Washing Machine /User’s Manual... -
Page 9: Package Contents
Your washing machine 2.3 Package Contents 1- Power cable 2- Drain hose 3- Transportation safety bolts * 4- Mains water inlet hose (One of the following filter types is used for the mains hose connection.) a- Electronical water shut-off b- Mechanical water shut-off c- Standard 5- Liquid detergent container** 6- User Manual... -
Page 10: Installation
Installation Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorised Service Agent. -
Page 11: Connecting Water Supply
Installation Keep the transportation safety WARNING: Ensure that the cold and bolts in a safe place to reuse when hot water connections are made the washing machine needs to be correctly when installing the product. moved again in the future. Otherwise, your laundry will come out hot at the end of the washing process Never move the product without... -
Page 12: Adjusting The Feet
Installation not be pinched between the drain and the WARNING: Your house will be flooded if the hose comes out of machine. its housing during water discharge. • If the length of the hose is too short, use it by Moreover, there is risk of scalding adding an original extension hose. -
Page 13: Electrical Connection
Installation Do not use any tools to WARNING: If the fitted moulded plug is not suitable for your loosen the lock nuts. Otherwise, socket, then the plug should be cut off and an they will get damaged. appropriate plug fitted. 3.7 Electrical connection Destroy the old plug, which is cut off as a plug Connect the product to a grounded outlet... - Page 14 Installation fuse box. If in doubt contact a qualified electrician. Transportation of the product 1. Unplug the product before transporting it. 2. Remove water drain and water supply connections. 3. Drain all water that has remained in the product. See 7.5 4.
-
Page 15: Preparation
Preparation 4.1 Sorting the laundry • Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature. • Always obey the instructions given on the garment tags. LAUNDRY WASH SYMBOLS Machine Wash Symbols WASH Maximum Water Temperatures Symbol(s) -
Page 16: Preparing Laundry For Washing
Preparation 4.2 Preparing laundry for washing • Operate the product in the highest capacity allowed by the programme you have selected, • Laundry items with metal attachments such as, but do not overload; see, "Programme and underwired bras, belt buckles or metal buttons consumption table". -
Page 17: Correct Load Capacity
Preparation 4.5 Correct load capacity 4.7 Using detergent and softener The maximum load capacity depends on the type When using detergent, softener, starch, of laundry, the degree of soiling and the washing fabric dye, bleach or limescale remover programme desired. read the manufacturer's instructions on the package carefully and follow the suggested The machine automatically adjusts the amount... - Page 18 Preparation Choosing the detergent type If the product contains a liquid detergent cup: The type of detergent to be used depends on the • Make sure that you have placed the liquid type and colour of the fabric. detergent cup in compartment nr. "2". •...
- Page 19 Preparation Using limescale remover Tablet detergents may leave residues • When required, use limescale removers in the detergent compartment. If you encounter such a case, place the tablet manufactured specifically for washing machines detergent between the laundry, close only. to the lower part of the drum in future washings.
-
Page 20: Tips For Efficient Washing
Preparation 4.8 Tips for efficient washing Clothes Light colours and Delicates/Woolens/ Colours Dark colours whites Silks (Recommended (Recommended (Recommended (Recommended temperature range temperature range based temperature range temperature range based on soiling level: on soiling level: cold- based on soiling based on soiling 40-90ºC) 40ºC) -
Page 21: Operating The Product
Operating the product 5.1 Control panel 1 - Programme Selection knob (Uppermost 4 - Programme Follow-up indicator position On / Off) 5 - Start / Pause button 2 - Display 6 - Auxiliary Function buttons 3 - Delayed Start button 7 - Spin Speed Adjustment button 8 - Temperature Adjustment button 5.2 Preparing the machine... -
Page 22: Main Programmes
Operating the product 5.5 Additional programmes Programmes are limited with the highest For special cases, additional programmes are spin speed appropriate for that particular type of fabric. available in the machine. Additional programmes may differ When selecting a programme, always according to the model of the machine. -
Page 23: Special Programmes
Operating the product 5.7 Temperature selection • Dark Wash Use this programme to wash your dark coloured Whenever a new programme is selected, laundry or the laundry that you do not want the maximum temperature for the selected it get faded. Washing is performed with little programme appears on the temperature indicator. -
Page 24: Programme And Consumption Table
Operating the product 5.9 Programme and consumption table Auxiliary functions Programme Temperature 2.00 1200 • • • Cold-90 Cottons 1.35 1200 • • • Cold-90 0.70 1200 • • • Cold-90 60** 0.85 1200 40-60 Cottons Eco 60** 0.68 1200 40-60 40** 0.56... - Page 25 Operating the product ** “Cotton eco 40°C and Cotton eco 60°C are standard cycles.” These cycles are known as ‘40°C cotton standard cycle’ and ‘60°C cotton standard cycle’ and indicated with the symbols on the panel. The auxiliary functions in the table may vary according to the model of your machine. Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.
-
Page 26: Auxiliary Function Selection
Operating the product 5.10 Auxiliary function selection • Pet hair removal This function helps to remove pet hair that remain Select the desired auxiliary functions before on your garments more effectively. starting the programme. Furthermore, you may When you select this function, Prewash and Extra also select or cancel auxiliary functions that Rinse steps are added to the normal programme. -
Page 27: Starting The Programme
Operating the product 5.12 Child Lock Changing the Delayed Start period If you want to change the time during countdown: Use Child Lock function to prevent children from 1. Press Delayed Start button. Time will increase tampering with the machine. Thus you can avoid by 1 hour each time you press the button. -
Page 28: Progress Of Programme
Operating the product 5.13 Progress of programme 5.15 Changing the selections after programme has started Progress of a running programme can be followed from the Programme Follow-up indicator. At Switching the machine to pause mode the beginning of every programme step, the Press the Start / Pause button to switch the relevant indicator light will turn on and light of the machine to pause mode while a programme is... -
Page 29: Canceling The Programme
Operating the product 5.16 Canceling the programme 5.18 Your machine is equipped with a “Standby Mode” To cancel the programme, turn the Programme Selection knob to select another programme. In case of not starting any programme or waiting Previous programme will be canceled. End / without making any other operation when the Cancel light will flash continuously to notify that machine is turned on by On/Off button and while... -
Page 30: Quick User Guide
Quick User Guide 6.1 Preparing the machine up indicator to show that the machine has been switched to the pause mode. 1. Make sure that the hoses are connected tightly. Also, when the loading door is ready to be opened, 2. -
Page 31: Maintenance And Cleaning
Maintenance and cleaning Service life of the product extends and frequently If your detergent drawer is the one indicated in the faced problems decrease if cleaned at regular following figure: intervals. 7.1 Cleaning the detergent drawer Clean the detergent drawer at regular intervals (every 4-5 washing cycles) as shown below in order to prevent accumulation of powder detergent in time. -
Page 32: Cleaning The Body And Control Panel
Maintenance and cleaning Use an anti-limescale suitable for the washing machines. After every washing make sure that no foreign substance is left in the drum. If the holes on the bellow shown in the figure is 1. Close the taps. blocked, open the holes using a toothpick. - Page 33 Maintenance and cleaning In order to clean the dirty filter and discharge the water: 1. Unplug the machine to cut off the supply power. WARNING: Temperature of the water inside the machine may rise up to 90 ºC. To avoid burning risk, filter must be cleaned after the water in the machine cools down.
-
Page 34: Troubleshooting
Troubleshooting Program does not start after closing the door. • Start / Pause / Cancel button was not pressed. >>> Press the Start / Pause / Cancel button. Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). - Page 35 Troubleshooting Washing takes longer time than specified in the manual.(*) • Water pressure is low. >>> Machine waits until taking in adequate amount of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends. •...
- Page 36 Troubleshooting Washing performance is poor: Oily stains appeared on the laundry. • Regular drum cleaning is not applied. >>> Clean the drum regularly. For this, please see 7.2. Washing performance is poor: Clothes smell unpleasantly.(**) • Odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and/ or in short programmes.
- Page 37 Troubleshooting Too much foam forms in the machine.(**) • Improper detergents for the washing machine are being used. >>> Use detergents appropriate for the washing machine. • Excessive amount of detergent is used. >>> Use only sufficient amount of detergent. •...
- Page 38 Troubleshooting Machine does not start. Nothing appears on the display. Machine may be unplugged. >>> Check the plug and attach it to the socket. Fuse may be defective. >>> Check the fuse and have it replaced by a qualified electrician if necessary. Power may be out.
- Page 40 Blomberg, 36-38 Caxton Way, Watford, Hertfordshire, WD18 8UF Tel: 0800 597 8560 Fax: 0845 6004922 email: service@blomberguk.com www.blomberguk.com...