Advertisement

Quick Links

Washing Machine
User Manual
WAFN 7123A PS
Document Number :
2820531369_EN/ 12-01-24.(15:16)

Advertisement

Table of Contents
loading

Summary of Contents for Blomberg WAFN 7123A PS

  • Page 1 Washing Machine User Manual WAFN 7123A PS Document Number : 2820531369_EN/ 12-01-24.(15:16)
  • Page 2: General Safety Instructions

    1 General safety instructions • Do not force open the locked loading door. The door will This section includes security open immediately after the instructions which may help prevent washing cycle has ended. If the the injuries and material damage risks. door does not open, apply the All kinds of warranties shall be invalid if solutions provided for “Loading...
  • Page 3: Children's Safety

    1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used room where the product is by children at and above 8 located. years old and by persons •...
  • Page 4: Important Instructions For Environment

    This product has been manufactured with high DANGER quality parts and materials which can be reused and are suitable for recycling. Do not dispose • Do not wash the product by of the waste product with normal domestic spraying or pouring water onto and other wastes at the end of its service life.
  • Page 5: Technical Specifications

    4 Technical specifications Supplier name or trademark Blomberg WAFN 7123A PS Model name 7176647500 Rated capacity (kg) Maximum spin speed (rpm) 1400 Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available...
  • Page 6: Appropriate Installation Location

    4.1 Installation • Leaving a gap at the sides of the machine is suggested to reduce vibration and noise INFORMATION • On a graduated floor, do not place the product next to the edge or on a platform. • Your washing machine automatically •...
  • Page 7: Connecting Water Supply

    4.1.4 Connecting water supply INFORMATION • It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher. CAUTION! •...
  • Page 8: Electrical Connection

    2 Adjust the feet until the product stands in a INFORMATION stable and balanced way. 3. Tighten all lock nuts by hand again. • Use an anti-limescale suitable for the washing machines. • Some water might have remained in the product due to the quality control processes in the production.
  • Page 9: Loading The Laundry

    4.2.5 Correct load capacity • Keep laundry items made of Angora wool in a plastic bag in the freezer for a few hours The maximum load capacity depends on the before washing. This can reduce piling. type of laundry, the degree of soiling and the desired washing programme.
  • Page 10 Using softeners • Do not select a programme with prewash if you are using a detergent bag or dispensing Pour the softener into the softener ball. Place the detergent bag or the dispensing compartment of the detergent drawer. ball directly among the laundry in the product. •...
  • Page 11 If the product does not contain a liquid Using bleaches detergent cup: • Select a programme with prewash and add the • Do not use liquid detergent for the prewash bleach at the beginning of the prewash. Do not in a programme with prewash. put detergent in the prewash compartment.
  • Page 12: Tips For Efficient Washing

    4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woollens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling based on soiling 40-90 oC) cold-40 oC) level: cold -40 oC)
  • Page 13: Operating The Product

    4.3 Operating the product 1 - Programme Selection Knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - End Time Adjustment Button 4 - Programme Follow-up Indicator 5 - Start/Pause Button 6 - Auxiliary Function Button 3 7 - Auxiliary Function Button 2 8 - Auxiliary Function Button 1 9 - Spin Speed Adjustment Button...
  • Page 14 • : Selectable * : Automatically selected, cannot be cancelled. ***: Eco 40-60 with 40 °C temperature selection is the test programme in accordance with EN 60456:2016/A11:2020 and energy label with Commission Delegated Regulation (EU) 2019/2014 - : See the programme description for maximum load. INFORMATION •...
  • Page 15: Main Programmes

    4.3.5 Main programmes Υγιεινή+ • Depending on the type of fabric, use the Applying a steam step at the beginning of the following main programmes. programme allows to soften the dirt easily. • Βαμβακερά Use this programme for your laundry (baby clothes, bed sheets, bedlinen, underwear, etc.
  • Page 16: Special Programmes

    • Apply the pre-treatment chemical on your • In the stain groups stated above, find the garments directly or add it together with type of stain you want to remove and select detergent when the machine starts to take water the quick auxiliary function selection key to from the main washing compartment.
  • Page 17 4.3.8 Temperature selection 4.3.10 Auxiliary function selection Whenever a new programme is selected, the Select the desired auxiliary functions before recommended temperature for the selected starting the programme. You can also select programme appears on the temperature indicator. or cancel auxiliary functions suitable for the running programme without pressing the Start/ To decrease the temperature, press the Pause button while the machine is operating.
  • Page 18: Functions/Programmes Selected By Pressing The Function Buttons For 3 Seconds

    4.3.10.2 Functions/Programmes To disable Child Lock: Selected by Pressing the Function Press and hold the Auxiliary Function button 2 for 3 seconds while the programme is running. Buttons for 3 Seconds While you’re holding the button pressed for 3 seconds, C03, C02 and C01 will be displayed respectively.
  • Page 19 4.3.13 Progress of programme 4. Press the Start/Pause button. The delayed end time you have set will be displayed. Countdown Progress of a running programme can be will start for delayed end. On the display, “_” will followed from the Programme Follow-up move up and down next to the delayed end time.
  • Page 20 Opening the loading door in case of power 4.3.15 Changing the selections failure: after programme has started Switching the machine to pause mode INFORMATION Press the Start/Pause to switch the machine to pause mode while a programme is running. • In case of a power failure, you can use the The light of the current programme will flash on loading door emergency handle under the pump the Programme Follow-up indicator, indicating...
  • Page 21: Maintenance And Cleaning

    4.4 Maintenance and cleaning 4.3.16 Cancelling the programme To cancel the programme, turn the Programme Service life of product extends and frequently Selection knob to select another programme. experienced problems will be reduced if it is Previous programme will be cancelled. End/ cleaned at regular intervals.
  • Page 22: Cleaning The Body And Control Panel

    4.4.5 Draining remaining water INFORMATION and cleaning the pump filter The filter system in your machine prevents • Foreign metal substances will cause rust solid items such as buttons, coins and fabric stains in the drum. Clean the stains on the fibres clogging the pump impeller during drum surface by using cleaning agents for discharge of washing water.
  • Page 23: Troubleshooting

    5 Troubleshooting 3 Follow the below procedures in order to drain water. Programmes do not start after the loading door is The product has an emergency water draining closed. hose, in order to drain the water: • Start / Pause / Cancel button is not pressed. >>>Press Start / Pause / Cancel button.
  • Page 24 Loading door cannot be opened. Washing performance is poor: Laundry turns gray. (**) • Loading door lock is activated because of the water level in • Insufficient amount of detergent has been used over a long the product. >>>Drain the water by running the Pump or period of time.
  • Page 25 Washing machine does not rinse well. Too much foam forms inside the product. (**) • The amount, brand and storage conditions of the detergent • Improper detergents for the washing machine is used. used are inappropriate. >>>Use a detergent appropriate >>>Use detergents appropriate for the washing machine.
  • Page 26 Therefore, please be advised that repairs by professional repairers (who are not authorized by Blomberg) shall void the guarantee. Self-Repair Self-repair can be done by the end-user with regard to the following spare parts: door, door...

Table of Contents