Dell Force10 C150 Configuration Manual page 397

Figure 18-10. Viewing the Cache Boot Configuration
FTOS#show boot system all
Current system image information in the system:
=============================================
Type
----------------------------------------------------------------
CP
RP1
RP2
linecard 0
linecard 1 is not present.
linecard 2 is not present.
linecard 3 is not present.
linecard 4
linecard 5 is not present.
FTOS#
If you attempt to cache a system image that does not support the cache boot feature,
Message 8 System Image does not Support Cache Boot Error
%% Error: Given image is not cache boot aware image.
Verify that the system is configured to boot with the selected cache boot image using the command
bootvar
as shown in
Figure 18-11. Viewing the Selected Cache Boot Image
FTOS#copy running-config startup-config
File with same name already exist.
Proceed to copy the file [confirm yes/no]: yes
!
10496 bytes successfully copied
1d6h32m: %RPM0-P:CP %FILEMGR-5-FILESAVED: Copied running-config to startup-config in flash by default
R4_E300#show bootvar
PRIMARY IMAGE FILE =
SECONDARY IMAGE FILE =
DEFAULT IMAGE FILE =
LOCAL CONFIG FILE =
PRIMARY HOST CONFIG FILE =
SECONDARY HOST CONFIG FILE =
PRIMARY NETWORK CONFIG FILE =
SECONDARY NETWORK CONFIG FILE =
CURRENT IMAGE FILE =
CURRENT CONFIG FILE 1 =
CURRENT CONFIG FILE 2 =
CONFIG LOAD PREFERENCE =
BOOT INTERFACE GATEWAY IP ADDRESS =
FTOS#
Boot Type A
DOWNLOAD BOOT 4.7.5.427
DOWNLOAD BOOT 4.7.5.427
DOWNLOAD BOOT 4.7.5.427
DOWNLOAD BOOT 4.7.5.427
DOWNLOAD BOOT 4.7.5.427
Figure 18-11.
system://4.7.5.427
flash://FTOS-EF-7.7.1.0.bin
flash://FTOS-EF-7.6.1.0.bin
variable does not exist
variable does not exist
variable does not exist
variable does not exist
variable does not exist
flash://FTOS-EF-7.7.1.0.bin
flash://startup-config
variable does not exist
local first
variable does not exist
B
invalid
invalid
invalid
invalid
6.5.1.8
Message 8 appears.
show
High Availability | 397