Manage Link Layer OAM
Enable MIB Retrieval Support/Function
IEEE 802.3ah defines the Link OAM MIB in Sec 30A.20, "OAM entity managed object class"; all of the
objects described there are supported. Note that 802.3ah does not include the ability to set/write remote
MIB variables.
You must enable MIB retrieval support and the MIB retrieval function.
Task
Enable MIB retrieval support and/or
the MIB retrieval function.
Adjust the Size of the Link OAM Event Log
Task
Configure the size of the OAM event
log.
106
|
802.3ah
Command Syntax
ethernet oam mib-retrieval
Default: Disabled
Command Syntax
ethernet oam event-log size entries
Range: 0 to 200. Default: 50.
supported
on
{
|
}
Command Mode
INTERFACE
Command Mode
CONFIGURATION