Redistribute Routes - Dell Force10 C150 Configuration Manual

Table 10-4. Regular Expressions
Regular
Expression
( ) (parenthesis)
[ ] (brackets)
- (hyphen)
_ (underscore)
| (pipe)
As seen in
config
command in the CONFIGURATION AS-PATH ACL mode and the
command in EXEC Privilege mode to view the AS-PATH ACL configuration.
For more information on this command and route filtering, refer to

Redistribute routes

In addition to filtering routes, you can add routes from other routing instances or protocols to the BGP
process. With the
routes in the BGP process.
Use any of the following commands in ROUTER BGP mode to add routes from other routing instances or
protocols.
Command Syntax
redistribute { connected | static }
[ route-map map-name]
redistribute isis
level-2 [ metric
]
map-name ]
246 | Border Gateway Protocol IPv4 (BGPv4)
Definition
Specifies patterns for multiple use when followed by one of the multiplier metacharacters:
asterisk *, plus sign +, or question mark ?
Matches any enclosed character; specifies a range of single characters
Used within brackets to specify a range of AS or community numbers.
Matches a ^, a $, a comma, a space, a {, or a }. Placed on either side of a string to specify a
literal and disallow substring matching. Numerals enclosed by underscores can be preceded or
followed by any of the characters listed above.
Matches characters on either side of the metacharacter; logical OR.
Figure 10-27, the expressions are displayed when using the
redistribute
command syntax, you can include ISIS, OSPF, static, or directly connected
level-1 level-1-2
[ | |
] [ route-map
value
Command Mode
ROUTER BGP or
CONF-ROUTER_BGPv6_
AF
ROUTER BGP or
CONF-ROUTER_BGPv6_
AF
show
commands. Use the
show ip as-path-access-list
Filter BGP routes.
Purpose
Include, directly connected or
user-configured (static) routes in BGP.
Configure the following parameters:
• : name of a configured route
map-name
map.
Include specific ISIS routes in BGP.
Configure the following parameters:
level-1 , l evel-1-2 , or level-2 : Assign
•
all redistributed routes to a level.
Default is level-2 .
• range: 0 to 16777215. Default is
metric
0.
• map-name : name of a configured route
map.
show