Dell Force10 C150 Configuration Manual page 189

The following examples show the BFD for BGP output displayed for these
Figure 9-14. Verifying a BFD for BGP Configuration: show running-config bgp Command
R2# show running-config bgp
!
router bgp 2
neighbor 1.1.1.2 remote-as 1
neighbor 1.1.1.2 no shutdown
neighbor 2.2.2.2 remote-as 1
neighbor 2.2.2.2 no shutdown
neighbor 3.3.3.2 remote-as 1
neighbor 3.3.3.2 no shutdown
bfd all-neighbors
Figure 9-15. Verifying BFD Sessions with BGP Neighbors: show bfd neighbors Command
R2# show bfd neighbors
* - Active session role
Ad Dn - Admin Down
B - BGP
C - CLI
I - ISIS
O - OSPF
R - Static Route (RTM)
M - MPLS
V - VRRP
LocalAddr RemoteAddr
* 1.1.1.3 1.1.1.2
* 2.2.2.3 2.2.2.2
* 3.3.3.3 3.3.3.2
Interface State Rx-int Tx-int Mult Clients
Te 6/0 Up 100
Te 6/1 Up 100
Te 6/2 Up 100
show
commands.
100 3 B
100 3 B
100 3 B
Bidirectional Forwarding Detection | 189