Ftsa Message Types - Dell Force10 C150 Configuration Manual

Task
All E-mails are generated in XML format by
default. For Type 5 messages only, you may
generate E-mails in clear text format. The
configuration is per action list.
FTOS Behavior: FTOS versions prior to 8.2.1.0 diverted Type 5 messages to the internal flash root
directory when you enter the command log-only. Beginning in version 8.2.1.0, FTOS stores these
messages in /CALL-HOME-LOGs on the internal flash.

FTSA Message Types

FTOS displays
Message 2 FTSA Message Sent
%RPM0-P:CP %CALL-HOME-HELPER-3-CALLHOME: Callhome service sent a message to Force10 at
pubslab@training10.com
FTSA generates Type 0 messages when you enable a recipient.
Figure 16-3. FTSA Type 0 Message
<AgentInfo>
<messagetype>Type - 0</messagetype>
<time>16:25:08.887 UTC Tue Feb 17 2009</time>
<serialnum>0026233
<hostname>R1_E600</hostname>
<messagenum>0</messagenum>
</AgentInfo>
FTSA generates Type 1 messages when messaging is disabled. Messaging is disabled when:
no-enable
• you
• messaging is enabled and you
Figure 16-4. FTSA Type 1 Message
<AgentInfo>
<messagetype>Type - 1</messagetype>
<time>19:49:51.581 UTC Wed Feb 18 2009</time>
<serialnum>0036232
<hostname>Force10</hostname>
<messagenum>0</messagenum>
</AgentInfo>
FTSA generates Type 2 messages for a force or auto failover.
Message 2 every time FTSA sends a message.
</serialnum>
no enable-all
a recipient or
no call-home
</serialnum>
Command
message-format { xml | text }
Command Mode
CALLHOME ACTIONLIST
Force10 Service Agent | 355