Create An Ftsa Policy Test List - Dell Force10 C150 Configuration Manual

2. Create the list of actions that FTSA should take if any of the conditions exist. See
Action List on page
3. Create a policy and assign a test list and action list. See
List on page
4. Set optional policy parameters. See
Figure 16-8. Creating FTSA Policies
Policy 1
Action List 1

Create an FTSA Policy Test List

Create the list of conditions for which FTSA should search. You may include a pre-defined list
(Table 16-1) and specify additional test conditions
To create a new, empty policy test list:
Task
Create a policy test list and name it.
Choose test conditions for a policy test list
Once you create a policy test list, FTOS enters the CALLHOME TESTLIST context. The list you created
is initially empty. You may choose one of three pre-defined condition lists, or create your own.
The three pre-defined condition lists are shown in
Table 16-1. Pre-defined Policy Test Lists
Condition Conditions Tested
Exception CPU above 85%, crash, task crash, dump, reload due to error, RPM failover due to error
358 | Force10 Service Agent
361.
363.
Test List 1 Action List 2
Create a Policy and Assign a Test and Action
Additional Policy Configurations on page 364
Policy 2
Test List 2
(Table 16-2).
Command
policy-test-list
Table 16-1.
Create a Policy
Policy 3
Action List 3
Command Mode
name CALLHOME
Test List 3