Changing The Password - Toshiba L5232 Instruction Manual

Changing the password

The following is an example to show how to change the password from 123 to 453.
Switch operation
A5: PASSWORD
A5: PASSWORD
A5: PASSWORD
A5: PASSWORD
A5: PASSWORD
A5: PASSWORD
A5: PASSWORD
Note: If password is set, be sure so manage the system so that the password is protected and not
forgotten.
If you forgot your password, you can check the password using the maintenance menu. For the
procedure to move to the maintenance menu, see 7.3.5 "Maintenance Menu." The service code
to check the password is "800".
For the management method including the method to read the password, use the management
method conforming to the management standard of the system used.
Display example
Select A5: PASSWORD from the setting item selection menu.
The currently set password data (123 in this example) appears.
However, if a wrong password is entered when you move from
123
the measurement mode to the setting mode, *** appears.
The cursor appears.
123
Press
from the right to 4.
423
Move the cursor to the 2nd digit.
423
Press
password to 5.
453
The display blinks and the set value is displayed for
conformation.
Press
453
disappears and the display returns to the condition that the
setting value is displayed.
Returns to the menu of setting item selection.
- 65 -
Description
to change the number of the 3rd digit of the password
switch to change the number of the 2nd digit of the
again to writer the data. Then the cursor
MENU/ENT
6F8A0917