Table of Contents
Advertisement
Changing each setting for digital I/O
The following is an example to show how to change the function of Digital Output 1 from High
limit alarm output (2:HIGH ALM) to Fluid empty alarm (A:EMPTY ALM).
To change other setting values, select the following function numbers.
Digital Output 1
Digital Output 2
Digital Output 3
Digital Output 4
Digital Output alarm status 1
Digital Output alarm status 2
Digital Output alarm status 3
Digital Output alarm status 4
Digital Input 1
Digital Input 2
Digital Input control signal level 1
Digital Input control signal level 2
Switch operation
Display example
F1: DO1 FNCTN
F1: DO1 FNCTN
F1: DO1 FNCTN
F1: DO1 FNCTN
F1: DO1 FNCTN
Select F1: DO1 FNCTN from the setting item selection menu.
The currently set function of Digital Output 1 appears.
1:HIGH ALM
The cursor appears.
1:HIGH ALM
Select the output function A:EMPTY ALM.
A:EMPTY ALM
The display blinks and the set value is displayed for
confirmation.
Press
A:EMPTY ALM
disappears and the display returns to the condition that the
setting value is displayed.
Returns to the menu of setting item selection.
- 92 -
F1: DO1 FNCTN
F2: DO2 FNCTN
F3: DO3 FNCTN
F4: DO4 FNCTN
F5: DO1 ALM STS
F6: DO2 ALM STS
F7: DO3 ALM STS
F8: DO4 ALM STS
G1: DI1 FNCTN
G2: DI2 FNCTN
G3: DI1 DET LEV
G4: DI2 DET LEV
Description
again to write the data. Then the cursor
MENU/ENT
6F8A0917
Advertisement
Table of Contents
