Toshiba L5232 Instruction Manual page 163

13.2.4 When switch operation is unable
START
Does intense light shine on the control panel
such as direct sunlight or reflected sunlight by
window glass or metal sheet?
Does the brightness change always by
ON/OFF of lighting?
Are you working with unfixed lighting such as
a flashlight?
Does the control panel get rained?
Is the control panel attached with dewdrop,
snow, ice, mud or oil?
Is the control panel hazed by steam?
Are you wearing dark color gloves?
Or are your finger or gloves stained?
Is there any light reflecting object near the
control panel?
Is there any reflecting object such as metal
plate placed opposing to the control panel?
Contact your nearest Toshiba representative.
NO
NO
NO
NO
NO
NO
YES
NO
NO
Place a cover to block the light from
YES
surroundings, or cover the control panel
by hand to block the light.
Place a cover to block the light from
YES
surroundings, or cover the control panel
by hand to block the light.
Operate the EMF converter fixing a light to
YES
shine on the control panel as constantly as
possible.
Place a cover on the control panel to
YES
protect from rain, and operate the EMF
converter.
Clean the attached or haze and operate
YES
the EMF converter.
Further, place a cover to prevent from
attaching.
Clean the stain on fingers or gloves, or
YES
wear gloves in light color and operate the
EMF converter.
Secure a space in front of the control panel
to allow a person to stand
Operate the EMF converter blocking the
YES
light from the reflecting object by standing
in-between the control panel and the
reflecting object.
- 162 -
6F8A0917
.