Table of Contents
Advertisement
Changing the fluid empty alarm On/Off setting.
The following is an example to change the fluid empty alarm setting from Alarm On (1:NORMAL)
to Alarm Off (0:OFF).
Switch operation
Display example
L1: EMPTY ALM
1:NORMAL
L1: EMPTY ALM
1:NORMAL
L1: EMPTY ALM
2:OFF
L1: EMPTY ALM
2:OFF
L1: EMPTY ALM
Select L1:EMPTY ALM from the setting item selection menu.
Then the fluid empty alarm On/Off setting appears.
The cursor appears.
Press
to select the fluid empty alarm Off
The display blinks and the set value is displayed for
confirmation.
Press
again to write the data. Then the cursor
MENU/ENT
disappears and the display returns to the condition that the
setting value is displayed.
Returns to the menu of setting item selection.
- 106 -
6F8A0917
Description
Advertisement
Table of Contents
