Checking the unit string of custom unit
Proceed as follows to check the unit string of custom unit.
Switch operation
B4: CUSTOM UNIT
B4: CUSTOM UNIT
Changing the unit string of custom unit
The following is an example to show how to change the unit string from AAA/BBB to XXX/ZZZ.
Switch operation
B4: CUSTOM UNIT
B4: CUSTOM UNIT
B4: CUSTOM UNIT
B4: CUSTOM UNIT
B4: CUSTOM UNIT
Note 1: The selectable characters are displayed cyclically as shown below:
Alphabet letter (lowercase)
Symbol
Display example
Select B4: CUSTOM DATA from the setting item selection
menu.
AAA/BBB
The currently set unit appears.
Returns to the menu of setting item selection.
Display example
Select B4: CUSTOM UNIT from the setting item selection
menu.
AAA/BBB
The currently set unit appears.
The cursor appears.
Press
AAA/BBB
change.
Change the character of the digit. (Note 1)
To change other digit, press
XAA/BBB
and change the character there. Repeat this operation until
↓
XXX/ZZZ appears on the display.
XXX/ZZZ
The display blinks and the set value is displayed for
confirmation.
Press
XXX/ZZZ
disappears and the display returns to the condition that the set
value is displayed.
Returns to the menu of setting item selection.
Alphabet letter (uppercase)
- 71 -
Description
Description
further to move the cursor to the desired digit to
again to write the data. Then the cursor
MENU/ENT
Number
6F8A0917
to move the cursor to that digit