Table of Contents
Advertisement
Changing the self-diagnosis function setting
The following is an example to change the self-diagnosis function from Self-diagnosis function On
(1:ON) to Self-diagnosis function Off (2:OFF).
To change the setting for alarm output factors, select the function "L3: ALM PRESET."
Switch operation
Display example
L2: SELF CHECK
L2: SELF CHECK
L2: SELF CHECK
L2: SELF CHECK
L2: SELF CHECK
Select L2: SELF CHEK from the setting item selection menu.
Whether the self-diagnosis function is used (On) or not (Off)
1:ON
appears.
The cursor appears.
1:ON
Press
2:OFF
The display blinks and the set value is displayed for
confirmation.
Press
2:OFF
disappears and the display returns to the condition that the
setting value is displayed.
Returns to the menu of setting item selection.
- 109 -
Description
to set the self-diagnosis function to OFF.
again to write the data. Then the cursor
MENU/ENT
6F8A0917
Advertisement
Table of Contents
