Toshiba L5232 Instruction Manual page 40

Functions of each switch
Switch
• Moves the mode from the measurement mode to menu display
• Moves the mode to the setting, calibration or measurement mode
• Writes data in the setting mode.
• Changes the numeric value or items in menu display and in the setting,
calibration or measurement mode.
• Starts or stops the totalizer (total value and pulse output) in the totalizer control
mode.
• Enables the converter to change the setting value in the setting or calibration
mode and the cursor appears.
• Moves the cursor (digit) in menu display and in the setting mode
• Resets the totalizer (total value) in the totalizer control mode
10.00 m/s
100.0 %
(Measurement mode)
A1:EX CURR
(Menu display)
B1:UNIT 1
%
(Data being changed)
C2:RANGE 1
02.000 m/s
(Data 0.2000m/s)
COUNT CTRL
3
F 1000 m
(Count stops)
D1: DAMPING
00.5 S
(Setting mode)
G1: COUNT RATE
3
1.23E-4 m
(Cursor at the position of "1")
COUNT CTRL
3
F 1000 m C
(Counter in operaiton)
- 39 -
Basic function
ENTER 111
(Menu lock cancellation screen)
A1:EX CURR
0.2100A
(Setting mode)
B1:UNIT 1
%
(Data has been changed)
C2:RANGE 1
03.000 m/s
(Data 0.3000m/s)
COUNT CTRL
F 1000 m
(Count starts)
D1: DAMPING
00.5 S
( Enabled to change the setting value )
G1: COUNT RATE
1.23E-4 m
(Cursor at the position of "2")
COUNT CTRL
F 0 m
(Resets the counter)
6F8A0917
(*note)
000
3
C
3
3
C