Toshiba L5232 Instruction Manual page 118

Changing the fixed output constant
The following is an example to change the fixed pulse output value from 50pps to 100pps. To
change the fixed current output value, select the function "L2: FIX. CURR."
Switch operation
L3: FIX. PULSE
L3: FIX. PULSE
L3: FIX. PULSE
L3: FIX. PULSE
L3: FIX. PULSE
Note: If you try to set a value outside of the settable range, the value will be forcibly set to the upper limit or the
lower limit of the settable range.
Display example
Select L3: FIX. PULSE from the setting item selection menu.
The currently set fixed pulse output value appears.
0050 pps
The cursor appears.
Press
0050 pps
change.
Change the number of the digit.
0150 pps
To change other digit, press
↓
the cursor to that digit and change the number there.
0100 pps
The display blinks and the set value is displayed for
confirmation.
Pres
0100 pps
disappears and the display returns to the condition that the
setting value is displayed.
Returns to the menu of setting item selection.
- 117 -
Description
further to move the cursor to the desired digit to
again to write the data. Then the cursor
MENU/ENT
6F8A0917
under this condition to move