Table of Contents
Advertisement
Checking the preset counter setting
How to check the preset count value is shown below.
To check the preset output function, select the function "I2: PRESET FNC."
Switch operation
Display example
I1: PRESET CNT
I1: PRESET CNT
Changing the preset count value
The following is an example to show how to change the preset value from 500 (count) to 1000
(count)
Switch operation
Display example
I1: PRESET
I1: PRESET
I1: PRESET
I1: PRESET
I1: PRESET
Select H1:PRESET from the setting item select menu.
The currently set preset count value appears.
00000300
Returns to the menu of preset item selection.
Select I1:PRESET from the setting item selection menu.
The currently set preset count value (500 counts in this
00000500
example) appears.
The cursor appears.
Press
00000500
change.
Change the number of the digit.
To change other digit, press
00001500
the cursor to that digit and change the number there
00001000
The display blinks and the set value is displayed for
confirmation
Press
00001000
disappears and the display returns to the condition the setting
value is displayed.
Returns to the menu of setting item selection.
- 99 -
Description
Description
further to move the cursor to the desire digit to
again to write the data. Then the cursor
MENU/ENT
6F8A0917
under this condition to move
Advertisement
Table of Contents
