Preparing The Cutting Units; Positioning The Turf Compensating Spring And Installing The Hose Guide - Toro Reelmaster 7000-D Operator's Manual

Preparing the Cutting Units

1. Remove the cutting units from the cartons.
2. Assemble and adjust as described in the
cutting unit Operator's Manual.
3. Make sure that the counterweight
installed at the proper end of the cutting unit as
described in the cutting unit Operator's
Manual.
Positioning the Turf Compensating Spring and Installing
the Hose Guide
Cutting Unit 4
Cutting unit 1
Cutting unit 2
3466-706A
is
G410291
Cutting unit 3
Cutting unit 4
Page 3–2
G409089
Cutting unit 5
Reel motor
Setup: Installing the Cutting Units
Weight