3-Relay And 6-Relay Modules; Hybrid Modules - ABB SM2000 User Manual

4.7.2 3-Relay and 6-Relay Modules

A:- Analog I/P B: Relay
Relay B1
Relay B2
Relay B3
Relay B4
Relay B5
Relay B6

4.7.3 Hybrid Modules

A:- Analog I/P B:-Relay
None, None
Digtial outputs C1 + C2
Digital Outputs C1 and C2
D5 Source
D5 Polarity
D6 Source
D6 Polarity
Digtial outputs C3 + C4
Digtial outputs C5 + C6
C:-Hybrid
Alarm 1.1A, Positive
Totalizer 1.2 Intermediate,
None, Positive
None, Positive
None, Positive
None, Positive
C: Hybrid
None
Positive
None
Positive
None, None
None, None
The Relay Source is a digital source used to energize/
de-energize the relay.
Note. If the relay is used to provide a totalizer count pulse,
the maximum pulse frequency is 5Hz. Consideration must also
be given to the mechanical life of the relay.
When the polarity is set to Positive, the relay is energized when
the digital source is active (On).
The digital output source is the internal digital source that is
used to activate/de-activate the digital output.
When the polarity is set to positive, the digital output is
energized when the digital source is active (On).
OK
4 CONFIGURATION...
67