ABB SM500F Instruction

Field mountable paperless recorder battery replacement

Hide thumbs Also See for SM500F:

Download this manual

—

A B B M E A S U R E M E N T & A N A LY T I C S | I N S T R U C T I O N | I N/ R A N D C/0 0 7- E N R E V. A

SM500F

Field mountable paperless recorder

SM500F

field mountable

paperless recorder

This publication details replacement of the battery

(B12454) fitted to the processor board of the

SM500F Paperless recorder. The procedure must be

carried out by a trained technician.

Tools required

• T8 Torx driver

Introduction

Battery replacement

Measurement made easy

For more information

Further information is available from:

www.abb.com/recorders

or by scanning these codes:

Sales

Service

Safety

IMPORTANT NOTE

Dispose of the old components as detailed in the

instruction manual (IM/SM500F).

Page 1 This publication details replacement of the battery Further information is available from: (B12454) fitted to the processor board of the www.abb.com/recorders SM500F Paperless recorder. The procedure must be carried out by a trained technician. or by scanning these codes: Tools required •...
Page 2 8. Refit the door assembly rear cover and use a T8 Torx driver to secure 6 Torx screws C. 9. Close and lock the door. 10. Restore the recorder's power supply. IN/RandC/007-EN Rev. A | SM500F | Paperless recorder | Battery replacement...
Page 3 2. Enter password (if required) and select Edit current configuration. 3. Select the Common configuration parameter: The Common Configuration menu is displayed: 4. Use the arrows to highlight the Time tab: SM500F | Paperless recorder | Battery replacement | IN/RandC/007-EN Rev. A...
Page 4 We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.