Totalizer Log - ABB SM2000 User Manual

...2 OPERATION
2.8 Totalizer Log – Fig. 2.8
Information.
• This view provides an historical log of totalizer activity. To view the current totalizer status, choose the Process or Digital View.
• When the totalizer log has reached the maximum number of entries defined in the Configuration level (see Section 4.4.3), the
oldest data is overwritten by the newest.
• The logging of totalizer values can be triggered at pre-determined intervals or by a digital signal assigned to the Totalizer Log
Source – see Section 4.6.5.
see list below
Log Entry Number
Batch total at the
time of the event
Max., min. and
average of the value
being totalized at the
time of the event
enabled in the Filters menu – see overleaf.
Totalizer Started
Totalizer Stopped
Totalizer Wrapped
Totalizer Reset
Intermediate Value Reached
18

Totalizer Log

Icon –
No Tag/Value
00 Total Daily In Flow
0005402801 Litres
01 Total Daily Out Flow
0005403191 Litres
02 Total Daily Out Flow
0005403120 Litres
Selects
Process
Group 1
Selects the
Audit Log
Note. Maximum, Minimum and Average statistics are not shown unless
Fig. 2.8 Totalizer Log
Source Tag Date
In Flow 28/03/00
225.4 l/hr
110.9 l/hr
201.0 l/hr
Out Flow 28/03/00
235.8 l/hr
110.9 l/hr
210.0 l/hr
Out Flow 28/03/00
Opens the
Operator Menu for
the current view
Timed Event
Triggered Event
Power Failed
Power Restored
View previous
page of data
28/03/00
14:52:00
Time
Oldest
14:52
Data
14:52
15:01
Newest
Data
View next page
of data
Batch Total
Maximum input
Minimum input
Average input