Common Configuration; Set Up - ABB SM2000 User Manual

...4 CONFIGURATION

4.4 Common Configuration

System Configuration
Common Process
Configuration Group 1
Group 2 I/O
Channels
Modules

4.4.1 Set Up

Set Up
Security Logs Operator Messages
Basic
Configuration Type
1
Number of Groups
28/03/00; 12:00:45
Date and Time
•1 A new channel data file is created if this parameter is changed. All unarchived channel data will be lost.
36
Group 1 Process
Channels Group 2
Functions Commissioning
Fig. 4.7 Selecting Common Configuration
RS 485
Common Configuration
Set Up
Security
Configuration type
Number of groups
Date & time
Language
Global alarm acknowledge
Instrument tag
Select the Configuration type required – see Section 4.1.1.
•1
Note. Parameters applying only to Advanced or to
Basic Configuration are identified
Enter the number of Process Groups required.
Each Process Group has 6 recording channels pre-assigned
to it – Group 1 (Ch1.1 to 1.6), Group 2 (Ch2.1 to 2.6).
If the Number of Groups is changed from 2 to 1,
configuration data for Process Group 2 is retained but not
used.
Set the current date and time.
Caution. Setting an earlier time or date results in all
data currently in the internal buffer memory past that date
being lost. If you wish to retain this information, make sure it
has been stored to external archive media prior to changing
the time or date – see 'Update', Section 3.3.
Note. Changes to the date and time are effective
immediately, not when the configuration is saved.
Logs Operator Messages RS 485
Basic
1
dd/mmm/yy; hh:mm:ss
English
See Appendix 1
SM 2000
A B
and respectively.