ABB SM2000 User Manual page 70

...4 CONFIGURATION
...4.7.3 Hybrid Modules
None
Analog output C1 source
Off
Analog output C1 range
Analog i/p A1
Analog output C2 source
0.0-100.0, 4.0-20.0mA
Analog output C2 range
Analog Outputs
Engineering low
Engineering high
Electrical low
Electrical high
68
0.0
100.0
4.0 mA
20 mA
OK
The Analog output source can be any internal or external
analog signal.
The Analog output range is the engineering range of the
output signal – see below.
The 'Engineering low' and 'Engineering high' settings allow
the engineering values corresponding to the 'Electrical low'
and 'Electrical high' values to be set.
The 'Electrical low' and 'Electrical high' values are the
minimum and maximum values of the current output, in
Electrical units. Range: 0 to 21mA.
Source range high
Analog output
engineering high
Analog output
engineering low
Source range low
21mA
Analog output
electrical high
Analog output
electrical low
0mA