ABB SM2000 User Manual page 33

...4.1.3 Configuration Access – Figs. 4.1 and 4.2
Note. The Configuration level cannot be accessed while the Security switch is set to the 'Configuration level
protected' position.
Unscrew the jacking screw
2
securing the instrument to
the case.
Remove tamper-proof
1
seal, if fitted
Configuration
User 1
Use the up and down keys to select your password.
Confirm with Enter key
0000
User 1
Edit Current Configuration
New Configuration
Open Configuration
Cancel
Disable Recording in Configuration
Cancel and return to the
operator level
Check this box to stop
recording while in the
configuration mode
Note. If New Configuration or Open Configuration is selected and the modified configuration file is later saved as
the current configuration, new internal data files for all enabled recording channels are created and any unarchived data
is lost.
Withdraw the
3
instrument from the
case
Fig. 4.1 Setting the Security Switch
Operator 1
Operator 2
screwdrivers, pen nibs etc. to operate the touch screen.
Operator 3
Operator 4
Displayed only if 'Configuration Security'
parameter is set to 'Password Protected'
– see Section 4.4.2
Edit the currently active configuration.
Changes are not implemented until saved
on exit from the configuration level
Open a new configuration with the default
settings detailed in APPENDIX 4
13_50_51 081100 SM2000
QSRTD_F
QSRTD_C
QSTHC_F
QSTHC_C
QSFlow
QSMilliamp
QSDemo
QSDairy
Company standard
Open a configuration previously saved
to internal or external archive storage
media (up to 16 configurations can be
stored in internal memory). Alternatively,
open one of the QuickStart templates –
see APPENDIX 4.
Fig. 4.2 Accessing the Configuration Level
Set the postion of the yellow Security switch to
4
'Configuration Level Not Protected'
Configuration level protected
5
factory use only. Ensure that it
remains in the position closest to
the rear of the instrument.
Caution. Do not use sharp objects such as
System Configuration
Configuration
Switch between internal and external
storage.
4 CONFIGURATION...
Configuration level not protected
Access the Configuration Level
as shown in Fig. 4.2
Note. The red switch is for
Common Process Group 1 Process
Group 1 Channels Group 2
Group 2 I/O Functions
Channels
Modules
31