Configuring The Bargraph Display - ABB SM2000 User Manual

...4 CONFIGURATION

4.5.3 Configuring the Bargraph display

Alarm Trip Level
(not shown for slow and
fast rate alarms)
Maximum Value
(solid color)
Instantaneous Value
Minimum Value
(white fill)
Bar
Recording Chart
Bar graph view enable
Bar graph markers
Menu enables
Bar graph menu enables
1. Message select enable
2. Alarm acknowledge enable
3. Max/min reset enable
44
Group 1
Level Pressure
2.08
metres bar
5.0 5.0
2.5 2.5
0.0 0.0
Analog Channels
Process Digital Archive
Horizontal
Max, Min and Alarm Trips
1 2 3
OK
In Flow Out Flow Temp
4 204.9 198.9 195
l/hr l/hr
300 300
150 150
0 0.0
Identical Maximum
and Minimum
Values
Minimum below
engineering limit,
maximum above
engineering limit
Select the Bargraph views that can be displayed in the
current Process Group.
Select the markers (channel-colored max./min. indicators
and alarm trip points) to be displayed on the bargraph.
Select the menu items to be accessible from the Bargraph
views.
Message select enable
Allows the Operator to activate one of six pre-configured
messages.
Alarm acknowledge enable
Allows the Operator to acknowledge any alarms associated
with the current group.
Max/min reset enable
Allows the operator to reset the maximum and minimum
values of one or more channels to the current value.
Note. Menu items that are not enabled appear greyed
out on the Bargraph menu.
28/03/00
14:52:00
Alarm 1
On
°C
250 Engineering High Value
Engineering Middle Value
125
0 Engineering Low Value
Digital
Channel