Extensions - NEC UNIVERGE SV9100 Manual

68
108 VoIP channels are now available.
2.5

Extensions

IP Extensions
This section gives an overview about the range of IP extensions that can be connected to the SV9100.
There are several different types of IP extensions that can be currently used:
· SIP MLT
· Standard SIP (3rd Party)
· IP DECT
SIP MLT Overview
SIP MLT extensions use an enhanced version of the SIP protocol (iSIP) developed by NEC to communicate
with the SV9100 system. This allows the phones to use most of the features available on a normal (TDM)
keytelephone.
Use the links below for further information.
SIP MLT General InformationSIP MLT
SIP MLT Features
SIP MLT QoS
SIP MLT Models
SIP MLT Firmware Upgrade Procedure
SIP MLT IP Phone Manager
SIP MLT Auto Configuration
SIP MLT Factory Default
Standard SIP Overview
SIP is an industry standard protocol and therefore there are many different hardware and software based
phones.
As these phones are not developed by NEC and are not designed specifically for use on the SV9100, they
do not support majority of the features that you would find on an SV9100 Keytelephone.
The features available to SIP extensions are detailed in the SIP Extension Compatibility Report for the
relevant SIP terminal.
Use the links below for further information.
Standard SIP General Information
Standard SIP availab le features
IP DECT Overview
IP DECT is an NEC product that combines the functionality of traditional DECT with the flexibility of the
Standard SIP protocol giving a robust and reliable wireless solution.
The handsets use the traditional DECT protocol to communicate with the DECT Access Points (DAP's) and
the DAP's use the Standard SIP Protocol to communicate with the SV9100.
Use the links below for further information.
IP DECT General Information
(DT800/DT00)