Iple Voip Channel Licensing - NEC UNIVERGE SV9100 Manual

62
2.4.3

IPLE VoIP Channel Licensing

The GPZ-IPE VoIPDB installed in a SV9100 system has a maximum channel (DSP) capacity of 256.
A default system with no free license enabled or additional licenses installed has 8 VoIP channels
available. This means 8 IP devices could make calls through the GPZ-IPLE to TDM extensions and
trunks. Alternatively 4 IP devices could make calls through SIP trunks as two VoIP channels would
be required for this. One for the device and one for the trunk.
When IP devices are licensed on the SV9100, VoIP channels are automatically assigned in licensing
but are not activated on the IPLE card until they have been assigned in programming.
You can check how many VoIP channels are available on a SV9100 from a keyset by pressing
Feature + 4.
The DSP resources are displayed as ACTIVE/RESERVED/TOTAL AVAILABLE
Feature + 4 - SV9100 running Free License
The full 256 VoIP channels are available on this SV9100.
Feature + 4 - SV9100 Free License disabled and no additional licenses installed